Australia Toll Free
1800 352 228
International
+61 2 8853 3000

‘THE HYDROSTATIC ENGINEER’S CHOICE FOR TIE-INS’

Double Block and Bleed Test Plug

The Double Block and Bleed (DBB) Test Plug allows an operator to positively isolate and monitor potentially explosive vapours during “hot work”. It facilitates effective hydrostatic testing of the new pipe weld connection.

Our effective solution will help you save time and money on flange-outs while reducing the amount of water required.

Double Block & Bleed Isolation Plug


DBB-120x95

High Lift Flange/Weld Test Plug

Our High Lift Flange/Weld Test Plug lets you monitor conditions upstream of the seal, isolate and purge the weld area, complete the weld, and hydrotest with one tool. The test plug isolates just the weld area and utilises a minimum amount of water requiring no line blinds, vacuum trucks or dehydration services.

With our test plug we can help you reduce non-destructive testing frequency and water and environmental waste associated with conventional flange testing.

High Lift Flange Weld Test Plug

FWTP-130x73

GripTight® High Pressure Test Plug

The GripTight® High Pressure Test Plug uses hydrostatic testing pressure to grip and seal more securely against the pipe internal diameter. It ensures a safer way to hydrotest open end pipes and tubes by preventing test plugs from loosening and ejecting under high pressure.

The greater the pressure, the greater the grip!

GripTight® High Pressure Test Plug

GTTP-120x88

GripTight® Isolation Plug

The GripTight® Isolation Plug revolutionises isolation and testing of pipe connections by providing enhanced operational safety features through integrating a Double Block and Bleed Test Plug with GripTight® Grippers. It allows an operator to positively isolate and monitor potentially explosive vapours during “hot work”, then effectively hydrotest the new weld connection with one easy to use tool. This test plug is capable of withstanding high upstream pressures and uses pressure to grip and seal more securely.

The greater the pressure, the greater the grip!

GripTight® Isolation Test Plug

GripTight-Isolation-Test-plug-100x101

GripTight® Reverse Pressure Test Plug

The GripTight® Reverse Pressure (GTRP) test plugs eliminate any concern over inadequate joint strength when hydrostatic pressure testing welded flange connections.

Our test plugs provide user confidence and cost-effectiveness through removing the need to blind, fill and pressurise the entire piping system; eliminating the need to handle and dispose of potentially contaminated test fluids.

GripTight® Reverse Pressure Test Plug

RPGT-120x89

OD GripTight® High Pressure Test Plug

Imatech Energy Technologies OD GripTight® Test Plug provides a unique self-gripping, self-sealing feature to grip and seal along the outside of the pipe or tube. The self-sealing feature ensures that the primary seal will not be damaged during plug installation or removal.

This test plug has been designed for outstanding high pressure performance and possesses a high strength dual seal mechanism that protects the primary seal during installation, removal operations and maintenance purposes. Our OD GripTight® Test Plug can provide you a faster, safer and reliable solution for high pressure, hydrostatic testing of pipe and tubing in the most economical fashion.

OD GripTight® High Pressure Test Plug

OD-Griptight-High-Pressure-Test-plug-100x104

*Products available for hire.